Commodore VIC20 part 2/2 – Building and testing the diagnostics test harness

This video is now available as early and ad-free access on Patreon.com. Support me on Patreon to get ad-free/early access to all videos, plus other perks.

https://www.patreon.com/ovesennet

Part 2/2. This video is about the Commodore VIC 20 8-bit machine from the early 80’s. In this part I build the diagnostics test harness that can be used with the Hyper Expander and the diag test rom.

Finally it is time to test the machine by using the harness and by running some demos and games.

Check out part 1: https://youtu.be/EA2He7wfJH8

Sven Petersen on Github: https://github.com/svenpetersen1965

I am using a Prusa 3D-printer, find one here: http://shop.prusa3d.com/#a_aid=ovesennet

Buy me a coffee or a beer via PayPal here: https://paypal.me/TommyOvesen

Find a Commodore 128 on eBay: http://ebay.us/6Y9M7o

Find a Commodore 64 on eBay: http://ebay.us/jII9QZ

Find a Commodore Vic 20 on eBay: http://ebay.us/ZQJvaT

6 thoughts on “Commodore VIC20 part 2/2 – Building and testing the diagnostics test harness

  1. Hi Tommy
    I would like to know where you got the 3D printer files for the harness devices? I would like to do the same and have the PCB’s covered?
    Thanks in Advance.

  2. Hi! I’ve been reading your weblog for some time now and finally got the courage to go ahead and give you a
    shout out from Lubbock Texas! Just wanted to say keep up the excellent
    job!

  3. Do you mind if I quote a few of your articles as long as I provide credit and sources back to your website?
    My blog site is in the exact same niche as yours and my visitors would truly benefit from some of
    the information you provide here. Please let me know if this alright with you.
    Regards!

Leave a Reply

Your email address will not be published. Required fields are marked *

Please reload

Please Wait